Blue led 450nm

1. Blue led 450nm 2. Lifespan : 50 000hours 3, With ROHS , Class A 4, Epistar/Bridge lux Chips 5, 1w Blue h

Blue led 450nm

Part No.	FD-32B45-Y1	Color	Blue
Luminous Intensity	20lm	Viewing Angle	120degree
Forward Current	700mA	Forward Voltage	3.0-3.4V
Wavelength	440-450nm/450-455NM	Lens Color	Transparent PC
Warranty  :	1 Year
Packing  :	ESD box
Leadtime :	3days for sample, 5days for order
Payment  :	TT, Western union

Specifications:

With reflow soldering technologyLow light degradation High CRIAvailable Power consumption: 1W,3w, 5wLight color: blue, royal blue

Lumens: 15-25lmBeam angle: 60-90-120 - 140 degreesForward current: 350mA/700mA/1400mAForward voltage: 2.9-3.6vHigh consistency in light color, high cost-effective

Measurement: 14.5*8.0*5.2mm

 

Applications:

  Street lamps, spotlights, architectural lighting landscapes, lighting exterior illumination and so on  Wall wash lamps, underwater lamps, decorative illumination and so on   Underground lamps, reading lamps, emergency lights, interior illumination   Miner’s lamps, flashlights, car lamps

  Traffic signals,indicating lamps

 

(1)       In order to aviod absorption of moisture it is recommended that the products are stored inthe dry

box (or dessicator ) with a dessicant.Alternatively the following environment is recommended:

   Storage temperature :5°C~30°C  Humidity:60% HR max.

(2)  Storage in high humidity

   If the storage conditions are of high humidity the product should be dried befor use.

   Recommended drying conditions: 12 hours at 100°C±5°C

(3)  Any mechanical force or any excess vibration should be avoied during the cooling

   process after soldering.

(4)  Reflow Rapid cooling should be avoided.

(5)  Components should not be mounted on distorted Printed Circuit Boards.

(6)  Devices should not be used in any type of fluid such as water,oil,organic solvents etc.

   When cleaning is required,IPA should be used.

(7)  The maximum ambient temperature should be taken into consideration when determining 

   the operating current.

(8)  Devices should be soldered within  7 days after opening the moisture-proof packing.

(9)  Repack unused product in anti-moisture packing,fold to close any opening and store in a dry place.

(10)  The appearance and specifications of devices may be modified for improvement without notice.

(11)  ESD Precautions.Static Electricity and surge damages LEDs.

It is recommended that wrist bands or anti-electrostatic gloves be used when handing the

LEDs.All devices,equipment and machinery should be properly grounded.

(12)  This product must bedriven by costant power supplier. 

Blue led 450nm